i-Digital Technical Support
Fuel automation support at i-Digital is handled by the engineering team that built the system. A helpdesk ticket or a call to the head office reaches the same engineers who wrote the firmware, built the controller and commissioned your site. Most faults are diagnosed remotely first, because the systems stay connected to the cloud platform; a site visit is arranged when the fault needs hands.

How to reach us
Two routes reach the engineering team: the helpdesk for anything that can be written down, and the head office phone for anything that cannot. Both are handled by the team that builds and commissions i-Digital systems, in office hours Monday to Friday, 9:30-17:30 (GMT+3).
Because the systems are cloud-connected, the tank levels, transaction records and alarms you see at the site are the same data the engineering team reads before anyone travels.
Technical helpdesk
Open a ticket for product faults, configuration questions or troubleshooting. Tickets reach the engineering team directly, and the helpdesk knowledgebase carries the questions that come up most often.
A ticket that gets a first diagnosis on the first reply carries four things: the product, the site, what the system is doing now, and when it started. Screenshots of the alarm and the brand of dispenser or tank gauge you are connected to save a round trip.
Head office
I DIGITAL Y.D.O.B. SAN VE TİC. A.Ş., GOSB Technopark, GOSB MH K.NEHROZOGLU CD. NO: 507, 41400 Gebze, Kocaeli, Turkey. Phone: +90 262 678 8959.
Call the office when a site has stopped and a written exchange would be slower. If you call outside office hours, open a helpdesk ticket as well, so the fault details and the alarm screenshots sit with the case.
Office hours
Monday to Friday, 9:30-17:30 (GMT+3). Systems are cloud-connected, which allows many issues to be diagnosed remotely before a site visit.
When you write in, give the times the fault appears. An alarm that fires during a delivery or at shift change is a different investigation from one that fires at random, and the timestamps decide which one it is.
What support covers
Support covers every layer the platform runs on: the forecourt controller, the tank gauge and probes, the LPG panel, the truck and terminal systems, the payment terminal and the cloud platform they all report into. The list below is what the helpdesk handles.
- Hardware support for controllers, panels, probes and readers: i-Console forecourt controllers, i-Control LPG panels, i-LS level probes and i-Reader units.
- Software and cloud platform support: the cloud platform behind i-Console, i-Level ATG, JCM and i-Terminal.
- System integration with dispensers, tank gauges and back-office systems: including SAP, Oracle and other ERP systems on terminal and depot installations.
- Troubleshooting and fault diagnosis: dispenser, tank gauge, payment terminal, truck register and loading bay faults.
- Commissioning and configuration assistance: dispenser and pump protocols, preset values, tank and probe configuration.
- Spare parts and replacement guidance for supported products: firmware updates, protocol changes and spare parts stay with the same team that builds them.
Wet stock that will not reconcile usually has a findable cause. The article fuel variance: how to find and stop hidden fuel loss at your station works through the four places fuel goes – measurement error, physical loss, paperwork and theft – and the daily routine that finds them early.
Fuel automation support across the forecourt, the tank farm and the back office
Fuel automation support separates by the layer the fault sits in, because that is how the diagnosis is done. On the forecourt, i-Console runs the dispensers and pumps, i-Pay takes the payment and i-Reader releases dispensing against an identified MIFARE card or tag. A pump that will not authorise is traced through that chain in that order.
In the tank farm, i-Level ATG reads product level, water and temperature through i-LS magnetostrictive probes – +/-0.5 mm accuracy, +/-0.05 mm resolution – and raises leak and fill alarms. Behind the site, i-Truck logs every delivery with its GPS position, i-Terminal runs job orders, RFID access and loading at depots, and JCM or the cloud platform puts the same figures in front of the owner and the head office.
LPG stations add i-Control, which combines the tank gauge, the forecourt console and the LPG control panel in one box: up to 5 addressable gas sensors, 4 emergency-stop buttons and 4 Rochester tank level monitors. A support case on an LPG site can start with a safety input rather than a stock figure.
Fuel and LPG are sold by measurement, so a disputed figure is settled by what the measuring system is required to do. OIML R 117-1:2019, Dynamic measuring systems for liquids other than water, sets the metrological and technical requirements for fuel and LPG dispensers and for measuring systems on road tankers where legal metrology applies. When a dispenser or a truck register is questioned, that recommendation is the reference the engineering team works to.
Frequently asked questions
Short answers first. The helpdesk knowledgebase carries the rest.
How do I get technical support?
Open a ticket at the helpdesk or call the head office on +90 262 678 8959, Monday to Friday between 9:30 and 17:30 (GMT+3). Include the product, the site and what the system is doing, and the engineering team can start from the ticket instead of from a question.
What does support cover?
Hardware, software, system integration and troubleshooting across the forecourt, tank, truck, terminal and payment systems: i-Console, i-Level ATG and i-LS probes, i-Control, i-Pay, i-Reader, i-Truck, i-Terminal, i-Pro-C and JCM. Commissioning, configuration and spare-part guidance are handled through the same helpdesk.
Can issues be solved remotely?
Often, yes. Because the systems are cloud-connected, the engineering team can frequently diagnose faults remotely before arranging a site visit. Tank levels, transaction records and alarms are readable from the head office, so the first question is usually answered without a technician on the road.
Do you help with installation and integration?
Yes – our engineering team supports commissioning and integration with existing dispensers, tank gauges, payment terminals and back-office systems. Where the protocol allows, the equipment already on site is kept, which is what makes a staged upgrade possible on a site that cannot stop selling fuel.
Who supports the system after commissioning?
The engineering team that built it, through the helpdesk and remote diagnostics. Firmware updates, protocol changes and spare parts stay with that team, so a compatibility question has one owner instead of three suppliers passing it along.
Can you support a site outside Türkiye?
Yes. i-Digital systems run in more than 32 countries, with 450+ sites automated, and support is handled from the head office in Gebze through remote diagnostics over the cloud platform. Where a site visit is needed, it is planned with the team that knows the installation.
Need help with a system?
Send us the details – product, site and what you are seeing – and the team will take it from there. Product faults and configuration questions go to the helpdesk, which is the fastest route to the engineering team.
A message that gets a diagnosis on the first reply names the product (i-Console, i-Level ATG, i-LS, i-Control, i-Pay, i-Reader, i-Truck, i-Terminal, i-Pro-C or JCM), says whether the site is reachable in the cloud, and describes what changed before the fault appeared: a firmware update, a new dispenser, a power cut at the site.
For an operator with several sites, say how many are affected and whether the pattern is the same on each one. A fault on a single site and a pattern across a network are two different investigations, and the second one usually starts in the cloud data.
Transform your fuel business with our solutions.
New projects, upgrades and staged modernisation of an existing station, terminal or fleet start with a short description of the operation. Tell us your country, what you run today – dispenser brands, tank count, back-office or ERP software – and what you want under control first. The engineering team replies with the modules that fit and the order to install them in.
Head office: GOSB Technopark, Gebze, Kocaeli, Türkiye. Monday to Friday, 9:30-17:30 (GMT+3), +90 262 678 8959. Questions about a system already in service go to technical support and the helpdesk.
