Product range

Fuel & LPG Station Automation Products

i-Digital fuel station automation products cover the forecourt, the tank farm, the delivery fleet and the terminal: controllers, tank gauges and probes, LPG panels, truck and depot systems, payment terminals and RFID readers. We write the firmware and build the hardware in-house, so the whole chain comes from one engineering team.

Every product on this page is a module of one platform. It does its own job completely and writes into the same cloud data layer, so a station, a terminal or a fleet can be automated one step at a time — and no step creates a second system to reconcile.

Firmware and hardware developed in-houseOne platform, modular productsPetrol, LPG and CNG
Fuel station automation products at a forecourt: console, tank gauge and LPG control panel
Home / Products / Products

Hardware and software from the same team

Our team develops both the firmware and the hardware, which is what gives us full control over reliability. Every product is a module of one platform: forecourt controllers, tank gauges, truck delivery systems, terminal automation, payment terminals, RFID readers and cloud management.

That means a station, a terminal or a fleet can be automated one step at a time — and each step still feeds the same operational picture — turnkey automation solutions.

Owning the whole stack changes who answers the difficult questions. When the controller, the probe, the register board and the cloud platform come from the same team, a compatibility problem has one owner instead of three suppliers forwarding it to each other. Firmware updates, protocol changes and spare parts stay in the same place.

Fuel is sold by measurement, so dispenser and tank data has to hold up to a defined level of scrutiny. OIML R 117 is the international recommendation for dynamic measuring systems for liquids other than water. It sets the metrological and technical requirements for fuel dispensers, LPG dispensers and measuring systems on road tankers where those systems fall under legal metrology control.

How these fuel station automation products fit together

Most projects add modules in the same order. The forecourt controller and the tank gauging come first, because they produce the two records everything else is built on: what was sold, and what is left in the tank. Payments, truck delivery, RFID identification and terminal automation follow once those two are trusted.

Each module hands its output to the others instead of keeping it. A sale recorded at the pump, a level change read in the tank, a delivery signed off on a truck and a loading job order at a terminal all land in the same account, and the site and the head office read the same record.

i-Console forecourt controller installed inside a fuel station cabinet
Products

Explore the product family

The products below are the fuel station automation products we supply, commission and support, and each one has its own page with specifications, models and options. Together they cover the forecourt, the tank farm, the delivery fleet, the terminal and the head office.

i-Console

Cloud-based forecourt controller for petrol, LPG and CNG stations. Runs on embedded hardware built in-house, and controls dispensers, pumps, tanks, payments and loyalty from one dashboard — on site or from the cloud.

i-Console cloud-based forecourt controller

i-Level ATG

Automatic tank gauge with leak detection and wet stock reporting. The ATG-7 controls up to 8, 16 or 32 tanks, the compact ATG-4 up to 4, and the data reaches a 7-inch local display, the forecourt system or the cloud.

i-Level ATG automatic tank gauge

i-LS

Magnetostrictive level probe with ±0.5 mm accuracy on product and water. Resolution is ±0.05 mm, average temperature comes from up to 5 sensors, and the IP68 stainless-steel body is submersible to 1.2 m for 24 hours.

i-LS magnetostrictive level probe specifications

i-Control

ATG, forecourt console and LPG control panel in one box. Up to 5 addressable gas sensors, 4 addressable emergency-stop buttons, 4 tank level probes, and a 7-inch or 4.9-inch touch display.

i-Control intelligent LPG station control panel

i-Truck

Truck delivery automation with GPS and live reporting. Every delivery is logged with its location, the customer is identified before the drop, and transaction data reaches the cloud over the cellular network as it happens.

i-Truck fuel and LPG truck delivery automation

i-Terminal

Terminal and depot automation with ERP integration. Job orders, RFID truck authentication, entry and exit weights, and multi-compartment loading, integrated with SAP, Oracle and other ERP systems.

i-Terminal automation for terminals and depots

i-Pay (OPT)

Outdoor payment terminal for 24/7 fuel payments. Cards, banknotes, contactless, barcode vouchers and coupons, in attended or unattended mode, with optional touchscreen and multimedia screens.

i-Pay outdoor payment terminal

i-Reader

MIFARE RFID reader for driver and vehicle identification. Dispensing is released only for an identified card or tag, preset values can be sent to the dispenser, and the transaction lands in the back office.

i-Reader MIFARE RFID reader

i-Pro-C

Electronic register controller board for equipment manufacturers. Built on an Arm Cortex-M4 MCU, it works with PD and turbine meters with shaft encoders as well as Coriolis mass flow meters, and logs to a 16–128 GB microSD card.

i-Pro-C electronic register controller board

JCM

Online fuel station management for owners and head offices. Real-time sales and stock, pump attendant tracking, customer tracking and centralised reporting across all stations.

JCM online fuel station management

Frequently asked questions

Do you develop the hardware as well as the software?

Yes. Both the firmware and the hardware are developed in-house, which gives us full control over reliability and keeps the controller, probes, readers and cloud platform consistent. The same team handles protocol changes, firmware updates and spare parts.

Which product does a station need first?

Most operations start with the forecourt controller (i-Console) and tank gauging (i-Level ATG with i-LS probes). Those two produce the records everything else depends on: what was sold and what is left in the tank. Truck delivery, terminal automation, payments and RFID identification can be added as the operation grows.

Can the products be used together?

Yes — they are modules of one platform, so data from dispensers, tanks, trucks, terminals and payment terminals meets in the same cloud layer. Nothing has to be exported from one system into another.

Do you support CNG as well as petrol and LPG?

Yes. i-Digital systems cover petrol, LPG and CNG station automation. The same controller family manages all three, and LPG stations add the i-Control panel with gas sensor and emergency-stop inputs.

Can these products work with the dispensers and tank gauges we already run?

Yes, wherever possible. Existing dispensers, tank gauges, payment terminals and back-office systems are integrated rather than replaced, so a station can be modernised in stages without stopping trade.

Who supports the system after commissioning?

The engineering team that built it, through the helpdesk and remote diagnostics. The head office is in Gebze, Kocaeli, Türkiye, and support and commissioning are handled by our engineers across the markets where the systems run.

Not sure which products you need?

Describe your operation — station, terminal or fleet — and we will map the shortest route to automation.

A useful first message is short: your country, what you operate, the equipment you already run and what you want under control. That is enough for the engineering team to answer with the modules that fit your site, and to say what can be automated first.

For operators with more than one site, the answer also covers sequence: which site runs first, which modules are needed there, and what can stay on the equipment already installed.

Transform your fuel business with our solutions.

Contact us today to learn how i-Digital can help you optimize operations, cut losses and fuel your growth.

Tell us about your stations, terminals or fleet and we will show you what can be automated first. Most projects start with one site and one module — a forecourt controller, or tank gauging — then add the rest as the numbers prove themselves.

Head office: GOSB Technopark, Gebze, Kocaeli, Türkiye. Monday to Friday, 9:30–17:30 (GMT+3), +90 262 678 8959. Questions about a system already in service — technical support and commissioning, or open a support ticket.